无限梦幻 - 全球顶级原创技术中文论坛

 找回密码
 立即入伙
搜索
楼主: nx111

OSCAM NX111修改编译版 [2017-03-08]

  [复制链接]
 楼主| 发表于 2012-2-4 18:44:25 | 显示全部楼层
本帖最后由 nx111 于 2012-2-4 18:46 编辑

回复 swhjb 的帖子

经测试,正常。请看日志。


-------------------------------------------------------------------------------
>> OSCam <<  cardserver started at Sat Feb  4 18:58:58 2012
-------------------------------------------------------------------------------
2012/02/04 18:58:58        0 s >> OSCam <<  cardserver started, version 1.20-unstable_svn, build #6337 (i686-pc-linux)
2012/02/04 18:58:58        0 s version=1.20-unstable_svn, build #6337, system=i686-pc-linux, nice=-1
2012/02/04 18:58:58        0 s client max. idle=120 sec, debug level=255
2012/02/04 18:58:58        0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2012/02/04 18:58:58        0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2012/02/04 18:58:58        0 s share updater thread started
2012/02/04 18:58:58        0   share-updater mode=initfast t=1s i=30
2012/02/04 18:58:58        0 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2012/02/04 18:58:58        0 s load CCcam config file: /var/etc/CCcam.cfg
2012/02/04 18:58:58        0 s Add reader device=tvbb.xxxxxxx.com,20003(type:0x35,protocol=)from CCcam.cfg
2012/02/04 18:58:58        0 s Clean up duplicate readertvbb.xxxxxxx.com,20003)
2012/02/04 18:58:58        0 s [debug reader] device=tvbb.xxxxxxx.com port=20003 enable=1 group=1
2012/02/04 18:58:58        0 s Cannot open file "/var/etc/oscam.user" (errno=2 No such file or directory)
2012/02/04 18:58:58        0 s userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2012/02/04 18:58:58        0 s signal handling initialized (type=sysv)
2012/02/04 18:58:58        0 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2012/02/04 18:58:58        0 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2012/02/04 18:58:58        0 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2012/02/04 18:58:58        0 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2012/02/04 18:58:58        0 s can't open whitelist file /var/etc/oscam.whitelist
2012/02/04 18:58:58        0 s can't open cacheex-matcher file /var/etc/oscam.cacheex
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s monitor: initialized (fd=6, port=988)
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s camd33: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s camd35: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s cs378x: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s newcamd: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s cccam: initialized (fd=7, port=12110, crypted)
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s pandora: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s csp: disabled
2012/02/04 18:58:58        0 s Starting listener 0
2012/02/04 18:58:58        0 s radegast: disabled
2012/02/04 18:58:58        0 s starting thread http
2012/02/04 18:58:58        0 s http thread started
2012/02/04 18:58:58        0 s starting thread reader check
2012/02/04 18:58:58        0 s reader check thread started
2012/02/04 18:58:58        0 s starting thread check
2012/02/04 18:58:58        0 s check thread started
2012/02/04 18:58:58        0 s cardreader: Initializing
2012/02/04 18:58:58        0 s reader tvbb.xxxxxxx.com_20003 protocol: cccam
2012/02/04 18:58:58        0 s creating thread for device tvbb.xxxxxxx.com
2012/02/04 18:58:58        0 s start reader thread action 8
2012/02/04 18:58:58        0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/02/04 18:58:58        0 s waiting for local card init
2012/02/04 18:58:58  81E3290 r data from add_job action=8 client r tvbb.xxxxxxx.com_20003
2012/02/04 18:58:58  81E3290 p cccam: timeout set to: 30
2012/02/04 18:58:58  81E3290 p cccam: auto build set for version: 2.1.1 build: 2971
2012/02/04 18:58:58  81E3290 p proxy reader: tvbb.xxxxxxx.com_20003 (tvbb.xxxxxxx.com:20003) cccam v2.1.1 build 2971, maxhop: 10
2012/02/04 18:58:58  81EAD88 h HTTP Server listening on port 1211
2012/02/04 18:58:58  81E3290 p tvbb.xxxxxxx.com: resolved ip=124.232.146.97
2012/02/04 18:58:58  81E3290 p connecting to tvbb.xxxxxxx.com_20003 on tvbb.xxxxxxx.com:20003
2012/02/04 18:58:58  81E3290 p socket open for cccam fd=8
2012/02/04 18:58:58  81E3290 p connect succesfull cccam fd=8
2012/02/04 18:58:58  81E3290 p cccam: server init seed:
2012/02/04 18:58:58  81E3290    3D 91 A8 9D C6 24 AD 97 F8 69 86 4F FB 1E DB 83
2012/02/04 18:58:58  81E3290 p cccam: sha1 hash:
2012/02/04 18:58:58  81E3290    C6 A2 B5 AF 1F 0C AA BC 07 CE 22 D7 EA BF AC 92
2012/02/04 18:58:58  81E3290    EA E2 B5 0A
2012/02/04 18:58:58  81E3290 p cccam: username '1082GXxxxxxx':
2012/02/04 18:58:58  81E3290    31 30 38 32 47 58 31 31 32 34 32 00 00 00 00 00
2012/02/04 18:58:58  81E3290    00 00 00 00
2012/02/04 18:58:58  81E3290 p cccam: pwd ack received:
2012/02/04 18:58:58  81E3290    43 43 63 61 6D 00 00 00 00 00 00 00 00 00 00 00
2012/02/04 18:58:58  81E3290    00 00 00 00
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: login succeeded
2012/02/04 18:58:58  81E3290 p cccam: last_s=0, last_g=0
2012/02/04 18:58:58  81E3290 p cccam: pfd=8
2012/02/04 18:58:58  81E3290 p cccam: send client data
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: sending own version: 2.1.1, build: 2971
2012/02/04 18:58:58  81E3290 p proxy tvbb.xxxxxxx.com_20003 initialized (server=tvbb.xxxxxxx.com:20003)
2012/02/04 18:58:58  81E3290 p add reader job action 1
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_CLI_DATA
2012/02/04 18:58:58  81E3290 p cccam: client data ack
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_SRV_DATA
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: MSG_SRV_DATA (payload=72, hex=48)
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: remove server FE44EE0B089879B4 running v2.1.2 (3094)
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: MSG_SRV_DATA MODE=PLAIN, len=72
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_NEW_CARD
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: card added: id 00000070 remoteid 00000070 caid 2600 hop 9 reshare 0 originid 00000070 cardtype 10
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_NEW_CARD
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: card added: id 00000073 remoteid 00000073 caid 2600 hop 9 reshare 0 originid 00000073 cardtype 10
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_NEW_CARD
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: card added: id 00000075 remoteid 00000075 caid 2600 hop 9 reshare 0 originid 00000075 cardtype 10
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_NEW_CARD
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: card added: id 00000076 remoteid 00000076 caid 2600 hop 9 reshare 0 originid 00000076 cardtype 10
2012/02/04 18:58:58  81E3290 p data on socket
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: parse_msg=MSG_NEW_CARD
2012/02/04 18:58:58  81E3290 p cccam(r) tvbb.xxxxxxx.com_20003: card added: id 00000077 remoteid 00000077 caid 0988 hop 9 reshare 0 originid 00000077 cardtype 10
2012/02/04 18:58:58        0 s init for all local cards done
2012/02/04 18:58:58        0 s anti cascading disabled
2012/02/04 18:58:58  81F5D28 c plain dvbapi-client granted (anonymous, au=off)
2012/02/04 18:58:58  81F5D28 c dvbapi: can't open priority file /var/etc/oscam.dvbapi
2012/02/04 18:58:58  81F5D28 c dvbapi: could not detect api version
2012/02/04 18:58:59        0   share-update [1] 2648772945 0
2012/02/04 18:58:59        0   asking reader tvbb.xxxxxxx.com_20003 for cards...
2012/02/04 18:58:59        0   got 5 cards from tvbb.xxxxxxx.com_20003
2012/02/04 18:58:59        0   s-card added: id 00000000 remoteid 00000070 caid 2600 hop 9 reshare 0 originid 00000070 cardtype 10
2012/02/04 18:58:59        0   s-card added: id 00000000 remoteid 00000073 caid 2600 hop 9 reshare 0 originid 00000073 cardtype 10
2012/02/04 18:58:59        0   s-card added: id 00000000 remoteid 00000075 caid 2600 hop 9 reshare 0 originid 00000075 cardtype 10
2012/02/04 18:58:59        0   s-card added: id 00000000 remoteid 00000076 caid 2600 hop 9 reshare 0 originid 00000076 cardtype 10
2012/02/04 18:58:59        0   s-card added: id 00000000 remoteid 00000077 caid 0988 hop 9 reshare 0 originid 00000077 cardtype 10
2012/02/04 18:58:59        0   reported/updated +5/-0/dup 0 of 5 cards to sharelist
 楼主| 发表于 2012-2-5 09:17:54 | 显示全部楼层
再次测试了swhjb和soso朋友的帐号,登陆访问服务器正常。
还不正常的,可以站内短信将配置和完整日志发给我看看。
发表于 2012-2-5 14:07:29 | 显示全部楼层
更新了6337 TVB看不到 换回6182就正常。何解?

点评

灯灯.N大系度搞紧  发表于 2012-2-5 14:12
发表于 2012-2-5 14:30:05 | 显示全部楼层
6337 TVB看不到 换回5956就正常,不过看免费台久了要过几个后才正常,其它稳定中,近来新版本只有不稳定,其实没什么变化。
 楼主| 发表于 2012-2-5 19:36:05 | 显示全部楼层
6236对卡片匹配使用了新的匹配算法,导致部分hop较高的卡片有可能被忽略掉。我正考虑如何完善该算法,或者使用旧算法。
 楼主| 发表于 2012-2-5 22:39:31 | 显示全部楼层
本帖最后由 nx111 于 2012-2-5 22:40 编辑

请测试:
oscam-mipsel-svn6342-nx111-20120205.tar.gz
oscam-powerpc-svn6342-nx111-20120205.tar.gz

修复6236卡片匹配算法中的bug.

点评

OSCAM 1.20-unstable_svn build #6342 正常解TVB  发表于 2012-2-6 10:27
多谢N大的耐心测试  发表于 2012-2-6 00:22
发表于 2012-2-5 23:27:59 | 显示全部楼层
多谢N大的耐心测试
发表于 2012-2-6 16:26:52 | 显示全部楼层
2月5日的测试版,还是不解TVB啊,其他节目解密没问题。
发表于 2012-2-6 19:14:07 | 显示全部楼层
N大编译的OS,库文件怎么都需要llibcrypto.so.1.0.0,我apt-get根本安装不上。。。
用N大大源代码编译的,没有N大大好用。不知道是不是还要加什么特殊命令?

root@ubuntu:/usr/local/bin# ls
gnhostlinux        oscam6003nx  oscam6018me  oscam6240nx
oscam5985nxnopcsc  oscam6012nx  oscam6018nx  oscam6337nx
root@ubuntu:/usr/local/bin# ldd oscam5985nxnopcsc
        linux-gate.so.1 =>  (0x00e21000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x00646000)
        libc.so.6 => /lib/libc.so.6 (0x00110000)
        /lib/ld-linux.so.2 (0x00bf1000)
root@ubuntu:/usr/local/bin# ldd oscam6012nx
        linux-gate.so.1 =>  (0x00dd9000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0097f000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x00110000)
        /lib/ld-linux.so.2 (0x0067c000)
root@ubuntu:/usr/local/bin# ldd oscam6018nx
        linux-gate.so.1 =>  (0x00371000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x00771000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x00be3000)
        /lib/ld-linux.so.2 (0x00e38000)
root@ubuntu:/usr/local/bin# ldd oscam6018me
        linux-gate.so.1 =>  (0x00437000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0063d000)
        libcrypto.so.0.9.8 => /lib/libcrypto.so.0.9.8 (0x00110000)
        libpcsclite.so.1 => /lib/libpcsclite.so.1 (0x00939000)
        libc.so.6 => /lib/libc.so.6 (0x0025f000)
        /lib/ld-linux.so.2 (0x00e8b000)
        libdl.so.2 => /lib/libdl.so.2 (0x00796000)
        libz.so.1 => /lib/libz.so.1 (0x003bc000)
root@ubuntu:/usr/local/bin# ldd oscam6003nx
        linux-gate.so.1 =>  (0x00b63000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x008f2000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x005b7000)
        /lib/ld-linux.so.2 (0x00bda000)
root@ubuntu:/usr/local/bin# ldd oscam6240nx
        linux-gate.so.1 =>  (0x00e6e000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x0035f000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x00110000)
        /lib/ld-linux.so.2 (0x00a56000)
root@ubuntu:/usr/local/bin# ldd oscam6337nx
        linux-gate.so.1 =>  (0x00e74000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x00c85000)
        libc.so.6 => /lib/libc.so.6 (0x0024b000)
        /lib/ld-linux.so.2 (0x001a8000)
root@ubuntu:/usr/local/bin# ldd oscam6040nx
        linux-gate.so.1 =>  (0x00da7000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x00b69000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x0067f000)
        /lib/ld-linux.so.2 (0x00404000)
root@ubuntu:/usr/local/bin# ldd oscam6236nx
        linux-gate.so.1 =>  (0x0045e000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x002c9000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x00a93000)
        /lib/ld-linux.so.2 (0x006be000)

root@ubuntu:/usr/local/bin# ldd oscam6136nx
        linux-gate.so.1 =>  (0x007c9000)
        libpthread.so.0 => /lib/libpthread.so.0 (0x00469000)
        libcrypto.so.1.0.0 => not found
        libc.so.6 => /lib/libc.so.6 (0x00110000)
        /lib/ld-linux.so.2 (0x00d9f000)
发表于 2012-2-6 19:16:09 | 显示全部楼层
我下载N大源代码那个oscam6018me,用以会就卡,虽然也有autoreader功能
您需要登录后才可以回帖 登录 | 立即入伙

本版积分规则

www.freedmx.net ( 闽ICP备09034667号 )

GMT+8, 2017-5-26 07:59 , Processed in 0.342308 second(s), 18 queries .

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表